JACK E4 4Thread Overlock (Direct Drive) Industrial Sewing Machine with small (23.1/2inch) table-top
Product Code: JACK E-4 4
JACK E4 4Thread Overlock (Direct Drive) Industrial Sewing Machine with small (23.1/2inch) English table-top
If you desire to sew on an industrial overlocker machine but your space is limiting you to stick to a domestic machine, then this machine will be perfect. It has a much smaller table and unit stand but is the same industrial overlock machine.
The dimensions of the table are L 23,1/2 -W 20inch. L60cm-W 50cm
Come & Try it before you Buy it!
Jack sewing machine is a new leading supplier in direct drive motors.
Their machine always has a unique design, and advanced futures to assist you with your sewing.
All of their machines use direct-drive motors, meaning the machine doesn't vibrate when you sew. It works very quietly, it saves electricity and helps the environment.
The direct-drive motor pushes the needle harder into the material, making it easier to sew and smother as well.
Jack industrial sewing machine is recommended for tailoring, curtain makers, fashion designers, alterations shops, bridal shops, schools, colleges, home, & dry cleaners.
This machine comes complete with a head, energy direct drive internal motor, wheel stand, table, and cotton stand. This machine comes with an energy-saving speed adjustable silent motor, proven to save up to 20% electricity when compared with a standard motor!
This machine is offered with a 12 month back to base Guarantee
|Differential feed ratio||For gathering 1:2 (Max. 1:4), For stretching 1:0.7 (Max. 1:0.6)|
|Differential-feed adjusting method||By lever (with micro-adjustment)|
|Inclination angle of the needle||20°|
|Light||LED needle light|
|Manufacturer’s guarantee||This machine is offered with a 12 month back to base Guarantee|
|Max lift of the presser foot||5mm|
|Max presser foot pressure||63.7N (6.5kgf)|
|Needle bar stroke||24.5mm|
|Needle cooler||Provided as standard|
|Needle position||Yes, Up & Down Function|
|Needle System||B 27 81x1 DCx21|
|Needle thread heat remover||Provided as standard|
|Number of threads||4|
|Overegging width||3.2, 4.0.mm|
|Power requirement||Single-phase 220V~240V 13 amp (can be used at home)|
|Stitch length (mm)||0.6 ~ 3.8|
|Table top dimensions||L 23,1/2 -W 20inch. L60cm-W 50cm|
|Weight of the machine head||27kg|
|Number of needles||2|